0
From the factory it will have a 6 volt, positive ground system.
However, it is popular to replace the original system with a modern 12v system.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What unit is used to measure volt?
A volt is itself a unit.
1952 dodge truck is it a 12 volt system or 6 volt system?
The 1952 Dodge truck line used a 6 volt electical system with a generator.
Why there is different types of voltage range 210 Volt 220 Volt 230 Volt 240 Volt 250 Volt in single phase AC system and what it based?
In the US the voltage is about 220 volts. This voltage is based upon the average voltage of the AC sine wave. It can peak as high as 240 volts or as low as 210 volts. So these different voltages are actually referring to an average 220 volt system.
Can 220 volt be the source at the panel and 120 volt out from the panel?
No, the source voltage can not change to a lower voltage without using equipment to do so.
What dos the voltage sign mean?
The voltage sign is V which mean volt
Is the voltage for 1956 Chevy truck 6 volt or 12 volt?
Originally it would have been a 6 volt system.
What voltage does a semi truck electrical system have?
12 volt
Where to find a 12 volt wiring diagram for a 1950 model Chevy truck?
The library
Is my 1949 truck 6 volt or 12 volt?
If your 1949 truck is a CHEVY or GMC and it still has the original electrical system, it would be 6 volt, negative ground. If it is a Dodge or a Ford with the oringinal electrical system it would be 6 volt, positive ground.
What voltage should your truck battery be at?
12 volt batteries if fully charged should show 14.2 volts
Why does volt meter on 85 Chevy sudenly go 16 volts?
The voltage regulator inside the alternator is bad.
What is the unit of electrical voltage?
The Volt
Units of voltage?
Voltage (V)AnswerThere is no base unit for voltage. The volt is a derived unit.
When was the Chevy volt made?
The Chevy Volt just went into production this year.
Can you charge an 8 volt battery with 6 volt charger?
No, you cannot charge an 8 volt battery with a 6 volt charger. The voltage of the charger must match the voltage of the battery.
Can you use a 125 volt bulb in a 120 volt lamp?
Yes, the voltage listed on the bulb is the nominal voltage and it will work perfectly on a 120 volt circuit.
Can you use a 6 volt adapter on a 4.5 volt appliance?
No, the voltage from the adapter should match the voltage required by the appliance.
