yes of course
mild steel
Bright mild steel is an alloy. It is usually used to make hammer heads and shears, and it has a smooth, but tough surface.
One can purchase mild steel in the UK from the following sources: The Metal Store, Parker Steel, Steel Web, eBay, K Steels, Midland Bright Steels, Metals 4 U.
The main difference between cast iron and mild steel is the carbon content. Mild steel has a lower carbon content than cast iron. This makes cast iron brittle, while mild steel is much harder.
Specifics of their alloys, they'll have different proportions of carbon, iron, chrome etc. These changes will make the one known as steel a little stronger and harder to machine than the one called mild steel.
from what i can gather, which isn't alot:Cold Rolled Steel Strip is produced, as the term suggests by the further rolling of strip produced by the hot strip mills.Prior to cold rolling, the mill scale has to be removed, normally by the Pickling Process which uses mechanical manipulation (around small diameter rolls) and acid to dissolve the surface scale. The surface is then washed to remove the acid and a light oil added to prevent rusting.Mild steel sheet is manufactured generally in two grades, cold rolled and hot rolled.Hot rolled mild steel sheet is the initial product produced by the steel mill as a downstream process prior to further processing such as cold rolling.Hot rolled mild steel sheet has a mill scale which is usually black in colour. Hence the common name Black Mild Steel Sheet. Black mild steel sheet is commonly used in fabrication shops, it is more economical than cold rolled mild steel sheet.Black mild steel sheet will usually require more preparation work prior to any finishing system being applied.Cold rolling is done to:Reduce the thicknessImprove the surface finishImprove the thickness tolerancesTo offer a range of "tempers"As a preparation for surface coating
Non-uniform grey and black colour.
mild steel is heavier
Mild steel
Mild steel, not copper.
Per the attached related link, the density (hence weight) of stainless is slightly more than the mild carbon steel. Using about 8.03/7.84 ratio of density, for the same volume of material the stainless will weigh 2.4 % more.
No, mild steel is low carbon steel with no other alloys.