Depends on the type of pool, i.e. inground or above ground pool. * My brother has had an inground vinyl lined pool for at least twenty years. He ives in an area which is southwest of New Orleans. That pool has survived more pool parties, hurricane parties, followed by hurricanes themselves (including Katrina) without a tear nor a leak. My above ground pool is a Doughboy and it has the side walls concreted into the ground. It is now eight years old. It survived hurricanes Lily, Katrina, and Rita in just the past 4 years. However, if you can afford it, gunite is probably the best. Around this area, fiberglass is often too light in weight and will float up with floods.
there is a company that has a dealer base across the country called Fiber Tech. You will have to have a concrete floor but other than that they line your pool with fiberglass and special resins giving you a product with a 25 year warranty. They are located in Largo FL.
The in-ground pools are prefabricated. The bodies are made of fiberglass-reinforced plastic. This is an alternative to vinyl-lined, gunite and poured concrete pools.
Swimming pool types include above-ground pools, fiberglass pools, vinyl-lined, gunite and poured-concrete pools. Learn the pros and cons of each type of pool.
you will find that people will swear by either method and then others will say in ground gunite or concrete is best . If properly maintained they are all much of a muchness. from what I have seen When they are new the vinyl pool looks better. the problem is that the vinyl will need to be replaced eventualy while you wont have this problem with fiberglass.
I say gunite for the ability to create any shape pool you desire. Otherwise, you are stuck with the pre-fab design of the vinyl variety.
An inground pool is typically lined with either gunite (concrete), fiberglass, or vinyl. Gunite and fiberglass are roughly the same cost, whereas vinyl is considerably cheaper. With the lower price comes less durability, as vinyl lining has to be replaced every 8-10 years or so, whereas the other two can last for decades. Vinyl is also much easier to puncture or otherwise damage. That said, many people still prefer vinyl inground pools due to the lower cost.
I have not heard of it being done before I have heard of fiberglass conversions however
A fiberglass pool requires less maintenance, less repairs structurally in the future, is quick to install, and is good for smaller pools. Gunite pools are better for a pool deeper than 8 feet, custom shapes, and is a bit harder on the feet than a fiberglass pool.
It would depend on what kind of an in-ground pool you refer to, i.e. gunite, concrete, block, vinyl liner, wood, or fiberglass.
Gunite is covered with plaster. It is sprayed on concrete sorta. They mix it in the hoses and it is blown on. You can go to youtube and see them gunite a pool. I am only aware of plaster, vinyl or painted pool surfaces. The vinyl is just like thin rubber.
Hum, not sure if you can actually plaster a fiberglass pool. The glass would have to be removed first. You will have to consult a pool builder, a company that installs fiberglass shells or a company that installs fiberglass in plastered pools - thus converting a gunite/plaster pool into a gunite/fiberglass pool. The later uses the old pool shell as the sub-grade or foundation so to speak. k
If you are talkin about a vinyl lined pool the answer is yes you can.