Lots of pictures. Be careful. Use side cutters to grab the springs. Don't worry they won't cut. You can use vice grips too. Make sure you reset the star wheel adjuster so that the drum is somewhat hard to put on so that you know the pads are adjusted to the point where they will actually work. If it's not done right you could get brake pedal fading (kinda seems like they need to bleeding).
Take it to a garage and ask them "Can you replace my brake shoes please"
Is there a special tool that is needed to remove and replace the brake shoes?
Remove the tire and wheel. Remove the brake assembly spring. The brake shoes will come off. Reverse the process to install the new brake shoes.
The rear brake shoes, on a Kawasaki 3010 Mule, will come off. When the brake springs are removed. Reverse the process to install new brake shoes.
you dont adjust you replace brake shoes
back shoes a lot of work,,many springs,
How do I replace rear brakes on a VW Polo GTI
Remove wheel, brake caliper, brake disc, parking brake shoes etc. Drive out broken stud, replace with new stud. Replace above in reverse order.
This will depend if it's just the pads, or the entire system? There can be no reason to do the entire system. pads, shoes, rotors, drums, calipers. It all cannot be bad and there is no way to answer.
I need timing mark for Toyota paseo
You have to replace brake shoes.
The best place to have your brakes replaced at would be Midas they would be able to replace both your brake shoes and even brake calibers if they need replaced.