sorry for my English y am from holland turn ignition on press 3 themes on the accelerator turn ignition of wait 15 sec if necessary repeat this a few thems good luck
That would be for the change oil light i believe.
unhook the positive on the battery for 5 min. This should reset your check engine light if it doesnt then you still have issues.
No, it comes on for an issue that causes an increase in emissions. See related question below.
it means you need to check the engine
You can not disconnect the check engine light.
A flashing check engine light is an indication of a severe engine misfire.
Auto Zone will check your engine light for free... Write down the codes and go from there.
According to the 2000 Ford Explorer Owner Guide : No , a separate fuse for the check engine light is not listed
The check engine light is a " picture " of an engine , just to the left of the engine temperature gauge
With a scan tool.
With a scan tool.
Check the oxygen detector.
a 2000 dodge ram 1500 the check engine light is on and the code says torque converter and clutch and overdrive solenoid. what do you think that the problem is?