I assume you only need to change the bulbs. Go into the trunk and look up. You should see the wires leading to the mounting point for the third brake light, you candisconnect the connectors and then change the bulbs this way.
No, there are no reset buttons on a 2007 Chrysler Sebring.
On the bracket the brake pedal mounts to.
Dot 3Dot 3
Common brake problems on a 97 Chrysler Sebring can be caused by leaks, worn pads, and stuck calipers. Check your brake system as problems can cause a serious accident.
On a bracket, above the brake pedal.
underneath the brake pedal
Dot3Dot3
It uses DOT3.
DOT3 is recommended
Check your brake fluid, probably low.
It is on a bracket, just above the brake pedal.
DOT 3