Standing on the passanger side of car looking under hood, you will see the belt. Looking straight down the middle in front of you, you will see a pully with a nut inthe center. Put a box end wrench on it a push down. Tension will release on the belt. Take off and put on new belt. Once new belt is routed around pulleys push back down on wrench a pull belt over top pully.
How do you replace a axle on a 95 holds cutlass supreme
it's called a serpentine belt.
The serpentine belt is broke or loose. Replace the belt
price on replaceing ball joint 1993 cutlass supreme
There is only 1 way the serpentine belt will go on, there is no alternate way.
i need to replace the ecm on a 1993 olds cutlass supreme,can i replace it with another ecm from another olds cutlass?
serpentine belt is located to the to the left side of the engine when standing in front of the car. locate the tensioner (it looks like a pulley with a short metal arm attachiing it to the engine. in the center of that pulley you take and wrench that fits that nut(i think a 15mm)then pull the wrench towards you taking tension off the belt, making sure you reroute the belt in the right way, do the same with the tensioner to allow slack to put the new belt on.
sounds to me like u have a problem with a tensioner or one of ur other accesories are seased up ex ac pump or water pump altnator just shotting options out let me knwo
you can't you have to replace it!
no it ruins the steering wheel
nevermind
find the tensioner pulley to release the belt. there should be two bolts on the top (one in front, one in rear) and one on the bottom rear ( this one is very tricky to get to).