You should not tile on top of a hardwood floor. If you do, it will crack as the wood underneath will expand and contract throughout the seasons.
Instead you should be installing on top of some sort of concrete floor. You could either add mud/self leveling mix or cement board. You may also want to remove the hardwood first, if you can.
you cut them so they fit
I will not explain exactly how to tile but i will tell you that your floor has to be very flat, an 18" tile is harder to install when there are crowns in floor they are not as forgiving as a 12 or 13" tile and you will have unacceptable lippage in your 18" tile, for installing go to john bridges website.
The first thing you want to do is be sure that the original tile is secure and even. If it is loose, or uneven the new tile may pop out or crack under normal wear and tear. If it is uneven or unsecure you can lay a sub-floor to give the new tile a even base.
It is possible but I would not reccomend it. If possible remove the old tile before laying the new tile. If you want to avoid removing the old tile you can lay a cement board over the old tile before installing the new tile.
It could, but unless it's extremely uneaven (like natural slate) just lay down the pad and install the floor. Above all, read the instructions that come with the floor.
Yes but lay the recommended underlay first!
you cut them so they fit
depends on the room size
Yes, if you want uneven and broken tile. You should level the floor first.
No, ceramic tile needs a firm subfloor, without movement, and one not prone to moisture. Laminate is none of those.
Yes. You should use a good quality underlay with it though to reduce the noise of the laminate knocking on the tiles.
Yes but you have to make sure you clean the floor first
you have to pull the linoleum up to lay tile. . .i would suggest a cement backer board over the existing plywood also
I will not explain exactly how to tile but i will tell you that your floor has to be very flat, an 18" tile is harder to install when there are crowns in floor they are not as forgiving as a 12 or 13" tile and you will have unacceptable lippage in your 18" tile, for installing go to john bridges website.
I'm guessing that you mean penny round tile. If so, no should never lay this over a laminate floor. Laminate floors are floating, so they move and your tile/grout will crack. You are also not supposed tile on top of any form of wood (laminate is recycled hardwood), because it expands and contracts so it will also cause the tile and grout to crack. You should remove the laminate. And then install on top of either smooth concrete, level it or add in cement board. If, however, you actually mean vinyl, then it depends the condition of the vinyl. It's usually better to remove it, but you might be able to get instead pour 1/2 self leveling cement or put cement board on top and then install. Your floor should be smooth and level before installing the tile.
their gona lay tile lol
You must make the measurements that you need to lay the tile, then lay out the tiles on the floor to help familiarize yourself with the pattern you are going to be working with. Lay your grouting adhesive and then finally the tiles.