With a satellite dish, a satellite receiver, a digital TV tuner card, you can watch satellite tv shows on your pc. It effectively replaces the set-top box with higher quality and flexibility. The signal will be more stable and you can have more initiative.You might use the TV tuner card, such as TBS DVB-S PCI tuner card, it allows user simultaneously receive dual DVB-S2/S TV channels, such as TBS 6981 PCIe DVB S2 dual tuner card, this enables the user to watch one channel from one transponder/satellite while recording another channel from a second transponder/satellite. Alternatively the user can use one channel for data download while watching TV on another channel at the same time
Using a Cable or Satellite tuner box, connect the audio output of the box to the input on the home theater system. If you are not using an external box, connect the audio output of the TV to the input on the home theatre system.
HDTV, High Definition Source (HD Cable Box, Antenna, HD Satellite Box), the cables to connect them.
Not knowing where this wall cable goes TO or comes FROM prevents any more help. Would suggest you run a new cable to these two items.
You can get a satellite box from online buying sites such as Amazon or Ebay. You can also get a satellite box from the company you or others bought the satellite from.
No. they have to transmit in HD as well. You will also need to make sure that your TV is HD capeable, cable box or satellite has HD service, as well as HDMI cables to connect everything to watch in HD.
You can by putting your charger into your ipod, and then connect the usb part into the usb port. Viola!
Yes. You would need to hook the cable/Satellite box cable up to the computer.
One first hooks up a TV tuner card to their computer and installs the software. Then, one would connect the satellite receiver box's video output to the tuner card. Then, one would turn on the satellite box and open the TV application installed with the capture card's drivers.
Connect its input to the output of a cable box and DVR's output to your television. If you don't have a cable / satellite set-top box, and your DVR has a built-in TV tuner, connect its input to a coax cable from your wall (raw cable feed) or a TV antenna (over the air reception), and DVR's output to your television, then scan for available channels. You should be able to watch TV through the DVR and record TV shows onto it.
With one box in the main room of the home you can connect different tvs with cable to the oher rooms. Unfortunately you are unable to view different channels in each room with this set up. If you wanted different channels in each roo you would need multiple receivers.
Install the antennae outside your home on the roof. Connect a coaxial cable from the antenna to the "ANT" port on the back of the Captive Works box in your house. Connect a coaxial cable to the "TV/VCR" port. Connect the other end to the television.
Yes, each companies dish is made to work only with their electronics (box).