Depends on whether you already purchased it and whether other parts are needed. If you have the toilet, a Kant leak, a wax seal,FLEXIBLE toilet supply, and the (nuts,bolts and washers) for screwing the toilet to the floor flange, plumber should not charge more than one hour of his rate to install it. Make sure the plumber does NOT silicone around the toilet. If there is a leak from the wax seal under the toilet and it is siliconed, the water stays under the toilet and rots the floor, if you are on a wood floor.
It's less than 1 hour labour in most cases. -That's what I'd expect to pay.
The cost will reflect an average of labor time and materials involved to install the fixture, a cost range is appropriate as an estimate
Labor alone for a residential boiler would be around $800 while a water heater would be around $210-$300. These are typical rates for Connecticut anyway.
A. I would pay approx $2 a square foot and workmanship guaranteed for 2 years. Laminate flooring comes with a factory warranty as well.
It really depends on a few things, where the clog is(is it in the toilet itself or in the "stack" below the toilet that runs into the sewer system and what is causing the clog. For lack of a better way of saying it, if it is toilet paper or a large #2 then a plunger will usually do the trick. For really stubborn clogs you could use a toilet auger, just pay attention not to damage the finish on the toilet bowl.
at the most you should have to pay 800$
$350
It's less than 1 hour labour in most cases. -That's what I'd expect to pay.
do you have to pay to install on your computer
Maybe, but certainly not much
no
I don't know but you could insalt it yourself
Banquet facilities should be more accommodating for how much you pay.
It is less than an hour of labour, so depends on what labour rate you pay. I regularly do them in about 35-40 minutes and charge one hour of labour.
i think you should pay about $500 for a decent laptop or netbook
They should pay anywhere from $250 to $300.
The cost will reflect an average of labor time and materials involved to install the fixture, a cost range is appropriate as an estimate