Toilets range in price from $90 to $400 or more . Depends on what toilet you select, if you need to hire a plumber to do the job, id figure around $75 to install. if you do it your self you could probally get away for $120 for a cheep toilet, wax ring, and new seat.
It depends where you buy it because the price changes but i am pretty sure its between $100 and $300
As a flooring installer in CT we charge $50 to remove and re-install the toilet.
It takes less than 1 hour labour, plus cost of toilet, gasket and new SS hose. You add that to about $100 for a plumber, or you do it yourself and learn something.
Nothing. Do it Yourself. It is easier than you would think. Nothing. Do it Yourself. It is easier than you would think.
well in the usa it would cost around 200 to 300 dolars.
$1,647 NOT including installation
Depends how much of it you replace . Also how much flooring you remove if you can't get underneath.
depending on your area, $80.00 on up.
The cost to replace just the toilet flange is around $5. The tricky part is knowing how to install it. If you use an outside source the cost will go up accordingly.
Toilet cistern can cost a lot since it is the most used water in the house. But there is some ways to reducing the amount of water your toilet is flushing. First fill a half gallon container with water, place the container in the tank of the toilet, lower it in to the water, replace the lid and then youÕre ready to flush.
You can find detailed instructions for replacing the wax ring under your toilet at http://www.hammerzone.com/archives/bath/fixt_repair/toilet/wax_ring/replace.htm. It should cost around $20.00 to complete this job.
Shut the water supply off to the toilet. Flush the toilet. Pull the old flapper out and replace it with the same type. Turn the water back on and test the toilet.
You would replace a flush valve or 'flapper' when it gets distorted or leaks slowly as they all eventually do. Take it out and go to Home Depot and you will see many better ones than there were when your toilet was made. Average cost $6-10.
easily!
Most plumbers would charge 2 hours to replace a complete toilet.
its only about 20 dollars go to a menards or home depot and buy the right size wax ring
Where is it leaking ? Flapper in the tank, replace flapper. Between tank and bowl, separate and replace the seal. Toilet to floor. Replace the wax ring under the toilet, making sure it is thick enough to form a seal and the bolts are installed correctly and holding the toilet down.
The cost to replace the water shut of valve varies based on if it is to a sink, toilet, hose, or the entire house as well as the type of pipe used. They can range from twenty dollars to around a hundred dollars.