answersLogoWhite

0


Best Answer

I HAVE A PORTABLE WHIRLPOOL AND I GOT A PROFFESIONAL TO DO IT BUT IT WAS 250$ TO INSTALL!!!! YOU CAN INSTALL IT YOURE SELVE YOU HAVE TO BUY SPECIAL TOOLS. OR YOU CAN CALL A PRO I THINK YOU SHOULD CALL THE PRO A friend of mine decided to jump in and install my old roll away portable Kenmore dishwasher today in her kitchen. She ran into a few problems. First some brilliant person raised the level of the sub floor so two cabinets had to be pulled out to get into the spot where it needed to go. So out they came. The cabinet where the dishwasher goes headed out to the trash. Then she removed some screws and took the outer housing off of the old dishwasher. We were met with a few Spiders that were hiding in there. Ewe ! Next problem, this particular Kenmore (made by whirlpool) roll away dishwasher water drain line connects under the dishwasher with a hose that looks like a washing machine hose. This was a Plumbing fiasco since she had to add a new hose. She made three trips to the hardware store before she found a threaded brass fitting that she could slide and rubber hose over and tighten it with a hose clamp. Then she had to slide the other end over the drain connection for the garbage disposal. She had to T into the hot water supply line and connect the water supply with a new hose also. Lastly we had to put the cabinet back into place. That was a fun job. And then finally the front panel just below the door is not the same kind as a regular built in dishwasher. It is intended to cover the wheels and attaches to the frame. So, now my husband will be watching the metal bin where he works for a similar dishwasher that is brought for recycling for a new lower front panel. We are lucky that we have this resource available or else we would be calling for a part that would likely be expensive. Oh, and one thing I failed to metnion. We tried just plugging the dishwasher in to the plug under the sink where the garbage disposal is plugged in (In this case it is a double plug with power to both halves) and guess what we found? It would not work. The voltage must be different. Lucky for us she had a plug right next to the side of the cabinet. We just nipped the corner off of the cabinet and ran the cord out from behind the cabinet to the outlet. Voila it worked! Not a professional wire job by any means, but it is something to think about when you consider doing this job yourself... With the hoses and plumbing connections she spent 60.00 on the project. The man at our town plumbing supply store said that his plumber would do it for about 120. A deal. But, that price would not have included taking cabinets out to make it fit and then putting one back. If you feel brave and have a good plumbing supply with a willing helpful staff that you can bug with questions all day and you are generally pretty mechanically inclined I say go for it. We got the pink hammer award for doing this today. (Though she did not call me in until the job was partly done I was glad to have the experience.) Do not kid yourself though. This is a full day job for a non plumber. Re-cap Where will you get power? Where will you get new fittings and hoses and are you saavy? Do you have a disposal that you can easily attach your drain hose to? Can you T into the hot water source under the sink? Good luck to you.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

12y ago

Site the opening, by tracing the outline. Drill a 3/8 inch-diameter hole in each corner and begin cutting with a saber saw blade along the inside line. Install the faucet and the sink strainers. After installing apply a bead of silicone caulk around the perimeter of the underside of the sink. Flip the sink over and insert into the opening. Insert the mounting clips that came with the sink. Finally connect the P-trap. Join the faucet lines to the hot and cold supply lines with flexible supply tubes and connect the strainers to the waste line. Turn the water on at the shut-off valves, remove the aerator from the faucet, then turn on the water from the facet to flush the system. Reinstall the aerator after the water ran for a min or so.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

If there was one there before, it's about a one hour job. If new fitting, you need to install electrical outlet and drill holes in cabinets for drain pipe and supply hose. That's about 3-4 hours work. -I never quote costs as you don't say where you are and rates vary. -Now you know the time, you figure it out based on local rates.

This answer is:
User Avatar

User Avatar

Geena G

Lvl 2
3y ago

Actually, it really is pretty easy. I installed my dishwasher about two weeks ago., and it was my first time. I am a 60-year-old widow and have learned to do things myself since my husband passed. There really is not anything difficult about it as long as you know how to do it. I went on YouTube, and there must be at least a hundred videos on how to install a dishwasher.

It is a matter of connecting the hoses which is the waterline and a hose to the garbage disposal. You have to connect three wires - green for ground and the black wire to the black wire and the white wire to the white wire - piece of cake. Then you have to connect the valve for the water to the bottom of the dishwasher. Align the dishwasher with your cabinets which may entail raising the feet (just turn them), aligning it, and securing it with hinges that comes with the dishwasher to the countertop. YouTube will explain all, but for never doing it before, it was pretty easy - just make sure you have the right tools before you begin.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

Click on the link below for dishwasher installation instructions.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

It is hard if the counter is not made for it unless you get the Danby Portable Dishwasher.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How difficult is it to install a dishwasher yourself?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Which dishwasher is easiest to install?

Whirlpool 24 in. DU1100XTP Built-in from www.ajmadison.com is a dishwasher that is easy to install.


Does wide plank flooring require a professional to install?

Flooring is difficult to install yourself if you do not know what you are doing. Hiring a professional who knows how to do this is best.


How hard is it to install a Bosch Ascenta dishwasher?

The Bosch Ascenta dishwasher is very easy for a person with no professional help to install. It comes with detailed instructions and can be completed relatively quickly.


Is it difficult to install Bose surround sound?

It is moderately easy to install by yourself. It'll make it easier if you understand the surround sound speakers and determine the place to install the Bose beforehand.


Can I install a new CPU myself?

It is possible to install the CPU yourself, but very difficult. Unless you have experience working with computer chips, it is advisable to bring the computer to a professional.


Is this difficult to install Can you do it yourself or will it require a skilled technition?

Customers who bought the fan from Amazon rated it as easy to install; they said it has pre-wired plugs and very clear instructions.


Is it difficult to install wood flooring?

To install a wood flooring would be on your skills. Either you should hire someone to install it for you or you could do it for yourself, but you should really hire someone that's professional so they can do it really fast.


Where can I find out about dishwasher repair services on the internet?

I have found a website that tells you how to fix your dishwasher by yourself. Why spend money on a professional when you can do it yourself? Here is the website: http://home.howstuffworks.com/how-to-repair-a-dishwasher.htm


How difficult is it to install a 240V outlet if the 3 wires to do so are exposed?

It's not hard, but if you don't already know that, you probably shouldn't do it yourself.


How difficult is it to install a new CD player in my car Is it a do it yourself type of project?

It depends on if you are mechincally incline to do it. It could be an all day project.


Is it difficult to install a chain link fence?

I'd like to install a chain link fence around my property. Are they difficult to install?


How hard is it to install a dishwasher?

Installing a dishwasher will take a screwdriver, wrench, and patience. It helps to make a simple diagram of the connections to help with hooking up the new one.