Depends on the size of the vent and what city you're performing the work in. Speak with a Plumbing inspector for that city and tell him the size vent and he will tell you the maximum length.
To determine the size of a vent you have to know developed length of pipe and fittings and the fixture units connected
The vent is behind the overflow cap where you close the drain. --Without a vent, the water would drain very slow.
A Plumbing We Will Go was created on 1940-04-19.
Depends what is causing the blockage dead animal, leaves, piping corrosion, hoar frost. Normally snaking or water jetting will clean most blockages
A Plumbing We Will Go - 1940 is rated/received certificates of: Australia:G
Go to new york to take my test for master plumbing
The cells that go across the spreadsheet horizontally is called a row of cells.
left to right --------------------------------
A Plumbing We Will Go - 1940 was released on: USA: 19 April 1940
No but you do need to study about plumbing. You can find places where you learn imparticuarly about plumbing.
toilet should have a vent with in three feet of down pipe, but as long as you are with in the drop range for hori. pipe run you can go as far as you want, but you need that air vent close as you can so that the suction from the toilet water does not pull the rest of water from toilet base(p trap).
Plumbing Supplies do not go bad, they last a long time with the proper care and cleaning.
First, be sure to unplug your dryer, extend your dryer out, not too far though..just the length of your vent, unscrew your vent from the back of the dryer, then slowly slide the vent off. It's recommended at this point that you get some kind of vacuum cleaner, and insert it into the dryer hole. Afterwards, use your vacuum inside the vent tube, reattach the vent tube to the vent, push the dryer back to its position, and go about your day.