How does the serpentine belt go on a 1994 Dodge Caravan V6?

already exists.

Would you like to merge this question into it?

already exists as an alternate of this question.

Would you like to make it the primary and merge this question into it?

exists and is an alternate of .


locate the "tensioner" pulley, on the schematic that is under your hood, on top of the radiator. Then place a socket on the bolt head in the middle of that pulley, and with a breaker bar, pull the entire pulley towards the front of the van, releasing the tension, and letting the belt slip off easily. Repeat this procedure once you have the new belt routed around most of the pulleys properly and slip it over the tensioner pulley last. Double check belt alignment on all pulleys, make sure it is well tensioned, then start your van and let it idle about 5 to 10 seconds, shut it off, and recheck the belt alignment and tension. If all looks well, then close the hood and call it a job well done.
133 people found this useful

How do you change a serpentine belt for a 1994 Dodge Caravan with a 3 liter engine?

locate the "tensioner" pulley, on the schematic that is under your hood, on top of the radiator. Then place a socket on the bolt head in the middle of that pulley, and with a

How do you change the serpentine belt on a Dodge Caravan?

What you need is a ratchet 15mm socket. Losen the idler then slide off the serpentine belt off. There should be a diagram for routing the belt if not draw a diagram before rem

How do you change the serpentine belt on your 1994 Grand Caravan?

This is easier than it may look. Look at all the rollers/ulleys that the belt must pass over/around/through. The ones that are smooth are the ones that get the back end of the

How do you replace the serpentine belt on a 2000 Dodge Grand Caravan?

Answer I found that when I needed to change my belt I also had to change the belt tensionor. I also had to get a special tool from my local parts store that would connect on

How do you replace the serpentine belt on a 2002 Dodge Caravan 3.8 V6?

Sears Hardware sells a nice tool which you can use to rotate the belt tensioner. It is essentially a long socket wrench with several shallow adaptors. I presume you should be

How do you install a serpentine belt on a 98 dodge grand caravan?

Answer . There is usually a sticker with the belt diagram located on the top radiator support. There is usually a sticker for the evaporative hose diagram as well. This is wh

How do you change the serpentine belt on a 1996 dodge caravan?

Study the belt diagram and also the way the old belt was put on, use a socket (16mm usually) and a breaker bar to pull the tensioner pulley down, releasing tension on the belt