0
a path of continuous electrons. may include switch but must have load or will short circuit.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What must be changed for circuit to work?
You must correct what is wrong with it before it will work.
What are some reasons an electric circuit would not work?
The switch may be off or there is a break in the wire that stopped the electron flow in the circuit
Does it matter where you place an ammeter in a circuit?
Ammeters must always be placed in series in a circuit, otherwise they will not work babes :)
How the circuit work?
An electrical circuit must be complete i.e it must form a closed loop,for it to work. Current only flow if the circuit is complete. A complete circuit is one that consist of a Voltage source, a consumer like a bulb and conductors. The conductor then connects the consumer and the voltage source together forming a closed loop.
How circuit work?
An electrical circuit must be complete i.e it must form a closed loop,for it to work. Current only flow if the circuit is complete. A complete circuit is one that consist of a Voltage source, a consumer like a bulb and conductors. The conductor then connects the consumer and the voltage source together forming a closed loop.
How do you get a series circuit to work?
In order to work, all the connections must be in order. You also need a voltage source.
Will battery terminals work if they touch rubber?
Your question is unclear. However rubber is not conductive. A circuit is required for electricity to flow, the circuit must be of conductive materials.
What does the work in an electric circuit?
The load that is connected in a circuit is what does the work in the circuit.
What happens when one light bulb burns out in a series circuit?
All of the light bulbs in the series circuit would go out.
What type of microscopy does not use light?
Electron microscopy; Scanning Electron Microscopes (SEM) and Transmission Electron Microscopes (TEM). The vacuum required for electron microscopy to work correctly precludes the observation of living organisms. Biological samples must be dried then coated with a conductive metal.
Where isolators are placed in substation?
An isolator is a non load-breaking switch, and is provides a visible means of isolating a component, such as a circuit breaker, transformer, etc., from the high-voltage lines, whenever it is necessary to perform maintenance of that component. Normally, isolators come in pairs, with one on each side of the component to be isolated. Isolators are only opened afterthe load current has been broken using a circuit breaker, and must be closed before the circuit breaker is reclosed.To work on, say, a h.v. circuit breaker, the breaker must be tripped, the isolators on either side must be opened and locked off, temporary earths attached to either side of the circuit breake- to-work card, detailing the maintenance work, must be issued to the crew by the supervising engineer.
In what type of circuit does electricity travel when it does work?
Electricity travels in a closed circuit when it does work.
