answersLogoWhite

0


Best Answer

An engine creates a vaccuum. This sucks in air, past a metered hole in the carb. This sucks a vapor spray of gas, which mixes with the air. This mixture passes through the intake manifold runners, into the cylinder head runners. When the intake valve opens, the mixture is sucked into the cylinder. The piston comes up to compress the mixture. When it is almost all the way up, the spark plug ignites the mixture, causing an explosion, which blows the piston back down. This is called the power stroke. Then, the exhaust valve opens, and the piston starts back up, which pushes out the burned fuel, which travels out the exhaust. The piston starts back down, and the intake valve re opens, which sucks the next charge in, and restarts the process. That is why it is a 4 stroke motor. 4 strokes per cycle.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How does a Chevy 350 small block run?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Chevy small block run what temp?

180 is best.


Why would a 5.7 Chevy small block run lumpy?

A cylinder is misfiring.


What would i have to do to my gen 1 small block Chevy to run nitrous?

no modifications necessary


What is the weight of a 400 Chevy engine?

the iron block only-about 350 lbs but I advise against it, they do run warm despite what some say


Would 350 small block run with the firing out of order?

With two wires crossed it would run, poorly but it would run. With four or more wires crossed, probably not.


Who did Chevy sell the 350 to?

Checker motor company used small blocks, Deloreans had 350's for a while, I also know of many boat versions available. The Datsun 260, and 280z cars were originally slated to run small blocks, but the deal fell through. Many motorhomes were equiped with the SBC, as well. I had a 90 caddy limo, that had a small block in it as well as all GMC trucks ran Chevy motors.


What distributor comes with a 1975 Chevy block 350?

An HEI from the factory but can run most any aftermarket and depending on where you are sourcing may or may not even be included.


How much power does a Chevy 400 sb have?

A 400 small block can run from 350hp to 400hp just depends what your running with it.


Why does your 350 Chevy run hotter on cylinder?

Huh?


How do you clean Chevy 350 push rods?

Run a small piece of wire down through them and clean them with carb cleaner. Then blow them out with air.


Can you run a transmission with out the vacuum line on a 84 350 Chevy?

no


Gto 400 big block or small block?

There is no such thing as a small block or big block Pontiac. Outside dimensions are all the same from the 326 all the way up to the 455. The only real difference in the blocks is the size of the mains. The 326-400 run a 3" main...while the 421-455 run a 3.25" main. If you are "comparing" it to say a small and big block Chevy.....dimensionally it falls in the middle.