There are two options.
Option 1: you turn the big twist-button, where your on/off switch is located, and turn it until it is on the No Flash mode.
Option 2: When you use one of the modes A-DEP, M, Av, Tv or P, you should click on the Menu button and in the fifth [of the seven] page[s] you find Flash Control.
When you've clicked on Flash Control you got to disable Flash Firing.
If this all doesn't help you, you have a little flash button right next to your lens.
You can get a longer life by not looking at your pictures so often. If you do not need the flash, you can turn off the flash and this should also extend your battery life.
You could be hitting the flash feature on the turn signal arm when you use it.
because you turn them on and off, on and off...
ok so when he flash goes off it brightens the picture and evens out the lighting but you can also turn the flash off if you wanted to hope i helped
On MY camera I push a button on the back and choose Flash Forced Off. I have a Panasonic Lumix FX-520
how do i turn off the automatic TX report
I didn't see how old this question is, but it doesn't have a flash. The spot that looks like a flash is an LED support light, and you press the right arrow to turn it on and off.
No, but you can stun it with a Flash Grenade, if you are talking abut MW3!
You turn the computer off and on
i had the same problem too :(.i couldn't figure it out so what i did,is when i was done with it i turned the battarie around so it turned off
Turn igniton to on position and put odometer in trip mode, turn off ignition. Hold trip button in and hold it in as you turn ignition to on position, it will flash Turn off ignition. Maintenance light should go and stay off
That is a setting that the dealers' scan tool can turn off and on.That is a setting that the dealers' scan tool can turn off and on.