Turn the key to the ON position without starting the engine. Pump the gas pedal 3 times within 5 seconds. You should now be back at 100%.
Book says:
The BCM doesn't know the oil was changed. It is a manual reset. Follow these instructions:
1) Turn the ignition to ON/RUN, with the engine off.
2) Press the information and reset buttons on the Driver Information Center (DIC) at the same time to enter the personalization menu.
3) Press the information button to scroll through the available personalization menu modes until the DIC display shows OIL-LIFE RESET.
4) Press and hold the reset button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
5) Turn the key to LOCK/OFF.
How do change a light on a steering column in a 2006 chevy truck?
reset oil chang light of 2006 BMW 750li
It requires an engine scanner to do that.
change the oil
That REQUIRES an ENGINE SCANNER to do that.
In order to reset the oil change light on a 2006 Hyundai Tuscan you need to take the car to the dealership or your local oil changing station.
Turn the key to the on position but do not start press the gas pedal 3 times within 10 seconds and the oil change light will flash 3 times and go out. now it is reset
I have a 2006 Chevrolet C4500 Duramax Diesel and I would like to know how to turn off or reset the check engine light on the truck.
check the owners manual. if you have one with the nav display in the center of the dash you will reset it through there. There is no oil change light in the instrument cluster.
That info can be found in the owners manual.
There is no fuel reset on that vehicle.
Just disconnect the battery for a few minutes then reconnect.