turn the ignition key on and press the gas pedal 3 times, turn off the key, and start up as normal..this should do it....
Have vehicle scanned to determine the problem and have codes cleared
Just disconnect the battery for a few minutes then reconnect.
Every time you start the engine, SRS(airbag) performs a self test for a few seconds. On a Chevy Express the light should only be on when there is a fault, and turn off once the fault is fixed.
With engine off. Turn key to on. Press accelerator fully three times. This should reset light.
How do I reset the service engine light on a 2003 Chevy Trailblazer?
The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.
Chevrolet does not use inertia/reset switches.
How do you reset check engine light for the 2009 Chevy trail blazer?
When you take your car in for an oil change, have the technicians there do the reset for you. (they should automatically do that for you, but you may have to ask them....to make sure they do it) Valvoline does it as part of their service.
Turn the key to the 'on' position (do not start the truck).Wait for the change oil light to come on.Tap the gas pedal 5 times.Move key to off position, move key back to on position. The change oil light should be reset.
Reset the change oil light on Mazda 3
turn the key to the on position engine not running step on gas pedal to the floor three times and wait for light to flash and go out and its reset