The check engine light indicates a problem with the emissions system so to permanently clear the code you must have the codes read and correct the problem, it is most likely a faulty sensor. Auto parts stores at least the big chains can read the codes for you and also help in clearing them when you are done, however you can disconnect the neg battery cable to reset the computer but be careful GM radios will go into security lock when power is interrupted and need to be unlocked at a dealer. If you are trying to get a smog certicicate on the vehicle and it wont pass due to the check engine light simply resetting it wont help because you will have to log around 100 miles before the smog computer will test it again and by then the light will be back on.
how to change third or center brake light on Chevy beretta 95
How do you reset check engine light for the 2009 Chevy trail blazer?
You can either bring it in to a Chevy dealer or use a programmer/tuner to reset the check engine light.
If the check engine light is blinking that means an engine cylinder misfire has been detected
Check
The check engine light (service engine soon) comes on and stays on when a problem is detected by the self diagnosis system of your vehicle.
Check your brake fluid. The light will come on due to low fluid. Or someone has yanked your E-Brake.
It requires an engine scanner to do that.
No, only a problem that effects emissions will set the check engine light.
A flashing check engine light is an indication of a misfire.
That REQUIRES an ENGINE SCANNER to do that.
Yes but, if the light is flashing no.