answersLogoWhite

0


Best Answer

Shut the water off at the main shut off where it comes into the house or at the meter and change the valve at the fixture. The valve at the fixture may be sweated on, compression, or threaded.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

10y ago

It is a valve on the floor, next to the toilet. The pipe from this valve feeds the toilet

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

That's eay. turn off and drain the water then unscrew it and put the new one in.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

With two wrenches

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

clockwise

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace the toilet shut off valve?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you shut of the valve to the toilet?

either right below the toilet or if you want to shut it off before that valve you have to shut off the water before it goes into the house.Depends on the type of "toilet"A tank and bowl or a one piece normally has a shut off on the left side below the tank.A flushometer type has either a knob or an angle valve that needs a flat screw driver to shut it


Why wont supply valve for toilet shut off after valve is closed?

It needs a new washer in it.


How much does it cost to replace a water shut off valve?

The cost to replace the water shut of valve varies based on if it is to a sink, toilet, hose, or the entire house as well as the type of pipe used. They can range from twenty dollars to around a hundred dollars.


Can I replace the shut off toilet valve or must I hire a plumber?

You can do it if you know how. You may get some good advice from the people working at the local hardware store.


How do you replace shut off valve for 82 Mercedes 300TD?

My 82 Mercedes continues to run after I turn it off with the key. I was told I needed to replace one or both of the shut off valve. What is the procedure to do that?


When the water valves under the sink or toilet are shut off the water till floes when the sink or toilet are turned on Why?

The washer in the shut off valve has probably split or come off completely over time.


How do you replace a flapper in a toilet?

Shut the water supply off to the toilet. Flush the toilet. Pull the old flapper out and replace it with the same type. Turn the water back on and test the toilet.


Why does the Shut off under sink leak after it is turned off?

If the valve is a multi turn valve, it is because the valve seat is no longer good. Replace the valve. It it is a quarter turn valve, it is because the mechanism that turns the ball is no good and the valve does not turn completely shut. once again, replace the valve.


How do you stop the toilet tank from filling with water?

There should be shut off valve called an angle stop towards the floor on the left side of your toilet. If you shut this valve by turning it clockwise this will stop the feed of water to the tank of your toilet.A:Your float valve may be defective or worn out


How do you turn the water to the toilet off?

Behind and/or under the toilet is a shut off valve. You only need to turn it like turning the faucet off. If that doesn't work, you'll have to turn off the main valve located outside the house in some cases.


How do you replace the fuel shut off valve on 2000 Buick lasabre?

Not sure what a fuel shut off valve is on a 2000 Lesabre. There is a fuel pump relay, a fuel pressure regulator, a fuel pump, fuel injectors, a fuel filter, but no fuel shut off valve.


How do you change angle valve for toilet?

Shut off valve at the wall? Turn the main water line off and change it. How you change it would depend on what type it is and how it attaches to the pipe.