1: Draw a diagram in case you forget the routing.
2: Loosen the tensioner and remove the belt.
3: Install the new belt and verify tension.
4: Examine the belt alignment on each pulley.
5: Start the engine and allow it to idle for a few seconds, then shut it off.
6: Repeat step 4.
Yes
Should have an automatic belt tensioner - if tension not correct replace tensioner
The water pump does not have a specified life span. The time to replace it is when it is leaking or noisy.
6 quarts
How do you replace a slave cylinder on a 1995 dodge neon clutch
i have a 99 tercel, help?
There isn't one.
Yes.
10w30.
Need make and model to answer this
Yes
Try bleeding the slave cylinder, otherwise there is no adjustment.