Remove the glove compartment with just a few screws its pretty simple. Once you do that you will see the passenger airbag because its pretty big. You will look up into the glove compartment and find four screws. Take them out unplug two wires and your done. Just make sure the battery cable is unpluged before you begin. Its a simple job I did it myself and it only took 45 minutes to take out and replace. I just cant find the airbag module, if you know how email me at blaken_002@Yahoo.com
No.
No
Non, it is not equipped with a passenger airbag switch.
There isn't a switch for the passenger airbag.
It is under the center console.
It is mounted to the floor, under the center console.
The airbag light stays on when the computer detects a malfunction and sets a code.
It does not have a passenger side switch.
No
The airbag light stays on when there is a malfunction in the system. The computer needs checked for codes, and the cause repaired for the light to go off.
Leave any repair of the SRS to an expert. Serious injury can occur.
The light come on when the system detects a problem and sets a trouble code. You should have it diagnosed by a trained technician. The airbag system is not for do it yourselfers.