remove the positive cable under the hood instead of removing the cable from the battery, then take off the top cover and bottom after that get a 4 prong screwdriver, at the top take off the 2 screws and last unplug the connectors finally pull off the multifunction switch off.
The multifunction switch is the turn signal switch and whatever else is part of it.
Ignition switch 2002 Chrysler sebring. Original key will not turn? Is there a fuse or replace the switch?
A 2005 Chrysler Sebring does not have a reset switch.
see section 19 of ur owners manual.
the multifunction switch... ( turn signal) twist it to turn on the lights and once the lights are on pull it towards the door to turn the fog lights on
A Chrysler Sebring does not have a reset switch.
There is no such part on a Chrysler Sebring.
A Chrysler Sebring does not have a kill switch.
A Chrysler Sebring does not have a reset switch.
There is no such part on a Chrysler Sebring.
A Chrysler Sebring does not have a reset switch.
A Chrysler Sebring does not have a reset switch.