The EGR Vacuum Solenoid on a 2001 Chrysler Lxi Coupe 3.0 V6 should be on the left of the upper manifold. The black cylinder that's on the outside is what you're looking for, it's on the otherside connected to the same plate as that. May have to remove the manifold or just unbolt it. You can buy the Solenoid from any auto store or Google image search one for either the 01' Sebring, Stratus, or Mitsu Eclipse. They are all the same.
The shift solenoids are located in the solenoid pack on the FRONT of the transmission. looking down at the transmission with the hood open, it will be close to the RADIATOR. you have to replace the whole pack.
It is not a direct swap. They use different transmissions, computers, wiring, etc.
A Chrysler Sebring does not have a reset switch.
How do you replace a fuel pump for a 1998 Chrysler Sebring Lxi Coupe ?
No.
Grand touring coupe
The first Chrysler Sebring was a Coupe (hardtop) & was released in 1995, the Sebring Convertible didn't get released until the following year - 1996.
A 2003 Chrysler Sebring is fuel injected and does not have a choke.
6x9s
5W30
No.
2004 CHRYSLER SEBRING COUPE = 4.6 Qts W/Filter 2004 CHRYSLER SEBRING SEDAN = 5 Qts W/Filter Hope This Helps.