0
On my 2000 Sonata, it was pretty straightforward. Loosen lug bolts on wheel. Jack up the car and finish removing the wheel lug nuts, remove tire. Remove brake calipers. Two bolts. Suspend caliper to remove weight from the caliper hose. The rotor should be able to be straight pulled off. It might need some banging with a rubber mallet. Use eye protection. Make sure your parking brake is off, as the parking shoes are inside the rotor and will hold the rotor tight if on. If this is unsuccessful, there is one or two screws on the rotor that can be removed and a longer screw inserted and tightened, this will lift the rotor off of the inner hub. Don't break the screw. Slide the rotor off, then replace it with the new rotor, replace caliper and probably a new set of brake pads. Replace wheel and lug nuts, lower car to ground and finish tightening the lug nuts to torque found in owners manual.
Wiki User
∙ 16y ago
Wiki User
∙ 16y agoAfter the wheels are removed ,remove two bolts that hold the caliper on and remove caliper.Then remove two bolts that hold the caliper mounting bracket.Then you need to remove the axle bolts on the end of the hub and slid axle out.There is a nut with 4 slots in it that hold the hub and rotor on you need a spindle socket to remove.I picked one up at Napa the part number is 3195 . After you remove nut I will slide right off,be ready to catch the outer wheel bearing as you slide it off.There are eight bolts that hold the rotor to the hub after removing give it a little tap to break apart.Oh ya block your truck and leave parking brake off or wouldn't get the rotor and hub off. Good luck............I just did mine today.
Wiki User
∙ 9y agoJack of the rear of your 2001 Oldsmobile Aurora. Remove the tire and wheel. Remove the brake pads and break assembly. Tap on the rotors with a hammer or mallet. Slide the rotors off. Reverse the process to install the new rotors.
Wiki User
∙ 9y agoTo replace rear wheel bearing on a Sonata, first jack up the car and grip the rear tire. Push it in and remove transmission tray and plastic cover from the suspension wishbone. Remove rear wheel, axle nut, and axle. Finally, replace the wheel bearing.
Wiki User
∙ 13y agoRemove the wheel. Remove the brake caliper. Remove the brake caliper mount. You can now remove the rotor.
Add your answer:
Earn +20 pts
How hard is it to replace the rear rotors on a 2002 impala?
not hard at all its simple
How do you replace rotors on 1998 S10 Pickup?
Front or rear rotors and 2 wheel or 4 wheel drive, it makes a difference.
How do you replace the rear brakes on a 2005 Jaguar X-Type?
removing rear rotors 2005 x-type
Cost to replace rotors?
We need to know the year, make, model and front or rear rotors to answer that one. also need to know if the rotors and hubs are one piece or separate.
How do you replace the rear rotors on a 1997 Explorer?
Remove the rear wheels, then the calipers and simply pull the rotors off. If the parking brakd is on the caliper you need a special tool ot retract the caliper.
Are the rotors on a 2000 dodge durango in the front rear or both?
Rotors on the front drums on the rear.
What should it cost to replace rear brakes in 1996 Volvo 850 GLT?
What should it cost to replace rear brakes, drums and rotors, '96 Volvo 850 GLT.
Why does your 2000 infiniti Q45 steering and console shifter shimmy when lightly applying the brakes?
resurface/replace front rotors. probably do the rear rotors too
What tools needed to replace rear rotors on 2004 Chevy impala?
a rachet a pipe and some patience
How do you replace rear rotors on Chevy optra?
Remove the wheel and the four bolts that hold it. Very easy
How to replace antenna on Lexus rx300?
Take the new antenna and your RX300 to Circuit City. They will install it for about $50.
How do you replace the brake pads for the emergency brakes on a 2004 dodge ram 1500?
If the truck has disc brakes on the rear then the park brake shoes are located inside the rear rotors. You have to remove the brake calipers, pads and rotors to access them
