There is either a tensioner or an adjustment screw on a pulley. A Haynes manual or Chiltons manual will help with the routing of the belt, and how to adjust the belt tension as well. Usually the idler pulley is used, before loosening the top bolt , loosen the center bolt of the pulley.
To replace the flasher relay on a 1998 Nissan Pathfinder 4WD, unplug the old turn signal flasher and plug in the new one. It is a three prong plug located under the dash on the driver's side. The hazard flasher relay works the same way.
can I move my spare tire thats on the back of 1998 pathfinder to under the vehicle
The 1998 Camry did not have a serpentine belt. Do you have a 1998 Corolla?
No, this Pathfinder does not have a speedometer cable. It has a speed sensor on the transfer case.
The rear universal joint on a 1998 Nissan Pathfinder should be replaced when it becomes worn out or broken. Symptoms of a worn joint include rough handling and suspension issues.
1998 Nissan pathfinder crankshaft pulley bolt is right handed.
1998 Nissan Pathfinder the speedometer and heat gauge quit workin?
Take it to a mechanic yo!
Replace it.
no only two minutes
265 70 R 15
It is located in the transfer case!