0
How do you replace a pullstring in a Briggs Stratton lawn mower?
Wiki User
∙ 14y ago
Answer
You will have to take off the engine cover that the pull rope is located in Usually it held on by four screws. Then pull the cover off and then you can access the string to rethread the pull handle or replace the whole rope. Hope this helps you.
Wiki User
∙ 16y ago
Wiki User
∙ 14y agoPull the original pullstring out completely, the hole in the wheel should be lined up with the hole in the housing. Use clamp to hold the wheel in place. Measure the pull string and cut the new one the same length. Now wind the wheel a couple of more turns in the way you were pulling the pullstring out. Thread the new string through both holes and tie a knot to keep in place. Let it rewind, if you have slack in the string after it is completely rewound you will have to pull string back out take up a few more turns and then reassemble.
Add your answer:
Earn +20 pts
Where can one purchase parts for a used Briggs and Stratton lawn mower?
One can purchase parts for a used Briggs and Stratton lawn mower from the following sources: Mower Graveyard, eBay, Briggs and Stratton, Zangler Repair, Lowes, Discount Online Parts.
Where is the location of the idle screw on the Briggs and Stratton 6.0 engine mulcher mower?
Where is the location of the idle screw on the Briggs and Stratton 6.0 engine mulcher mower?
Gap on spark plug Briggs and stratton engine 4.5?
0.030 is the gap for briggs and stratton 4.5 hp mower
Can you replace your 12.5 Briggs and stratton tractor engine with a 16hp Briggs and stratton?
Yes, most all of the Briggs single cylinder engines are exchangable. You just need to be concerned to make sure that you don't under power your mower. In your case that is not a problem.
Who does Briggs and stratton contract to build their snapper mowers?
Briggs and Stratton does contract anyone to build mowers. The mower manufacturers contract Briggs and Stratton to build their engines (or whatever engine is on the unit). That is why you can have a Briggs and Stratton on most any type of mower. Same is true for Kohler, Tecumseh, etc. Not to say that the engine manufacturers do not build their own type of outdoor power tool but as the question states "snapper mower". Also keep in mind that if you have a snapper mower with a Briggs and Stratton engine and you need warranty work on the engine you need to go to an Authorized Briggs repair facility where as if you have a mower warranty then you need to go to an authorized repair facility for the mower manufacturer.
Are Briggs and Stratton or Kohler engines better in a lawn mower?
Briggs and Stratton and Kohler engines are considered quality components. Neither is likely to be better. However, the Briggs and Stratton brand is more popular.
Where can you get a Briggs and Stratton Quattro 4HP lawn mower owners manual Model 21675x41A?
You can find the operator's manual for that engine at www.briggsandstratton.com. You will need to contact the manufacturer of the mower for the lawn mower owner's manual. Briggs and Stratton did not amke that mower, only the engine.
What kind of oil for 5.5hp Briggs and stratton lawn mower?
sae30
What is the name of a Briggs and stratton lawn mower model 096722?
It is a 2-cycle 4HP Briggs motor.
Where can one purchase oil for a Briggs and Stratton lawnmower engine?
Briggs and Stratton is a select brand of lawn mower. When oiling one's Briggs and Stratton lawn mower engine, it is best to use a high quality oil. One can find such an oil at their local home improvement store, such as Home Depot.
What is the gap on the spark plus on a 18.5 Briggs stratton lawn mower?
.030
How do you install muffler on Briggs and stratton mower engine?
a manul to show me the way to do it
