0
How do you replace a blown head gasket for 1996 Chrysler sebring 2.4L engine?
Wiki User
∙ 12y ago
Remove intake and exhaust manifolds, and then remove the head. This is a major repair that should only be attempted by someone who is competent.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How much should it cost to replace a blown head gasket on a Chrysler sebring V6?
The price to replace a blown head gasket on a Chrysler Sebring V6 should be around $1,000.00. The price can vary depending on where you have the repairs made or if you replace it yourself.
How is a head gasket leak repaired on a 1998 Chrysler Sebring?
It requires replacing the head gasket.
How do you replace a head gasket located on a 1996 Chrysler Sebring LXI?
Replacing the head gasket on any vehicle is a long and complicated process, however if you wish to see basic step-by-step instructions go to the related question on the right side of the page "How do you replace a head gasket?"
How do you Replace head gaskets 2.7liter Chrysler engine?
In short you have to take the head off, replace the gasket/s and replace the head. You best bring it to a pro.
Where is the oil drain plug gasket on a 2000 Chrysler Sebring jxi?
It should be on the drain plug.
What would cause a leak behind the water pump on a 1998 2.5 Chrysler Sebring?
Water pump gasket, head gasket, water tube,
How much would it cost for a blown head gasket on a 2008 Chrysler sebring?
Expect to spend from $800 to $1200.
How do you change the spark plugs on a 1998 Chrysler sebring?
you need to take the intake maniflod off, and the 2 screws on the back of the manifold. total time 2.5 hours, replace intake gasket or reseal it...
How do you repair a blown head gasket on a 97 Chrysler Concorde?
Take it off, replace the gasket
How to replace the head gasket on a 2002Chrysler Chrysler PT Cruiser?
Remove upper and lower engine intakes. Tie back or label tubes so not to loose reconnections. Once everything is remove the gasket is exposed. Pull gasket replace, then return intakes and labeled tubes.
How do you change the oil pan gasket on 1995 Chrysler 3.5 engine?
A person can change the oil pan gasket on a 1995 Chrysler 3.5 engine by first draining the oil. The pan is then unbolted, the original gasket removed, and a new one put in place.
How much does it cost to repair head gasket 1999 Chrysler 300m?
Depending on the engine ball park $700.00 to $1500.00 or higher if the heads are warped etc. There are two heads, never replace just one gasket.
