First remove the door panel, 4 screws and a little prying and its off. There are Five rivets that need to be drilled out. Two are easy and you will see which ones are the two. The Three others are backwards. I had to drill on the soft alluminum and then take a pair of dykes and snip at it until I got the rivets out. It took me about an hour to get all five out.
I suggest buying the motor and regulator together, much easier to mess with. If you didn't then you must drill out three more small rivets and then place the old regulator on to the new motor. I taped the regulator to the bracket because I didn't want the angle to change. Then I used the supplied bolts and placed the regulator and bracket to the motor. Once it's on remove the tape.
Now, back to the rivets that are a pain. You will notice that the rivets that are backwards are also a mounting stud. I had to use a small drill bit from the back side and drill it out so that I had a clean hole. You have to do this on all 4 studs. Then find some small bolts, nuts and washers and bolt it back up. Make sure you put the regulator back on it's track for the window.
You should be up and running. I have pics but it's pretty easy.
How do you replace the blower motor on a 1994 chevy lumina euro?
the beretta and lumina motors are about the same i have a lumina motor in my 95 beretta
Wire, Switch, Motor, window regulator.
Behind the dang motor
i don know how would a monkey fix it
Right next to the blower motor
what is the spark plug gap for a 98 Chevy lumina sedan 3.1Liter engine
I need instructions on how to change the window motor in 1995 Chevy Camaro.
There are four motor mounts located on a 1990 Chevy Lumina. Two on either side of the engine. One the rear and one in front of the engine.
How to repair electric windows depends on what is wrong with them. If the motor that runs the window has burned out then replace the motor. If the switch is faulty then replace the switch. Check for broken wires, repair them if found.
Remove the inside door panel of your 2002 Chevy Cavalier. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
how to repair a window motor on a 380sl mercedes