01-03 Tribute. Remove the two screws on the inside lip. The tail light pulls straight out towards the rear. What you can't see is that it is held in by 2 snaps on the outboard side.
2005 model
Yes unfortunatly
there is a plastic cover above the tail light held on by two screws. remove that and simply pull the tail light out.
The tail light covers (the painted bezels) are only held on by 3m Automotive, double-sided tape.
To remove the tail light assembly on a 1997 Mazda Protege remove the two screws that are usually covered by the trunk. After that use some force and push on the inner part of the tail light toward the side of the car. There is a clip in the side of the car that requires some force to undo. Make sure you push in the outward direction to either the driver side on the driver side tail light or the passenger side for the passenger side tail light. After that is removed the tail light should be hanging by wires ready for bulb changes. To change the bulbs just twisth the plastic part.
You can access the Nissan taillights from the cargo compartment. Remove the tail light assembly cover. Remove the tail light wiring harness. Remove the tail light assembly retaining bolts.
You will need to remove the tail light covers in the cargo compartment. Remove the wiring harness. Remove the tail light assembly retaining bolts.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
How do you open the tail light onTake it to a garage you tight git
Fuse panel.
in side the trunk there are is gonna be carpwenting covering the metal part of the body you will see plastic screws remove that then remove the tail gate it self and your be able to remove the tail light in side the trunk there are is gonna be carpwenting covering the metal part of the body you will see plastic screws remove that then remove the tail gate it self and your be able to remove the tail light
Inside trunk, remove thumb screw to fold back paneling near tail lights. Then remove three thumbscrews and the whole tail light assembly can be moved out to change light bulbs.