the plastic shield around the stereo pops off with some force. there are four screws, one in each corner of the stereo/cd player. BEFORE YOU UNSCREW THE SCREWS ON THE STEREO, check if your radio is type 1 or type 2. Type 1 is average sized. Type 2 is much larger. If you have type 2, you have to remove the center console. There are two screws in the side that can be accessed if you are sitting in the back seat and the two front seats are moved all the way up. Pop out the cup holder and ash tray. There are 2 screws under there. The final two are under the plastic around the radio. Remove the shifter knob (it screws off) and pull the console up. Look out for the wires to the cigarette lighter and the light for the ash tray. Once removed, you can pull the console out, unscrew the radio, unplug all the wires from behind it, and it just slides out.
how can i remove stereo from honda crv 1997?
The mitsubishi eclipse has never had a bose stereo your 01 gs came with an infinity stereo, if your car does have one it is because it is aftermarket. To remove it you simply take the 2 screws at the bottom of the face plate that covers the heating and radio then remove the 2 or four depending how big your stereo is and pull it out.
go to installdr.com to see how to remove and install a stereo out of any car
You have to remove the panel which goes around the stereo and compartment. You will see four screws which are holding the holder with the stereo and compartment. Remove the screws and take out the holder. You might need to disconnect wire harness and the antenna before you will be able to pull the holder out. The stereo is sitting on 2(4) screws which keep it in the holder.
http://installdr.com/ try this site i think it has what u need
you match them with the same colors
it is a random sequence. one code will not work for all of them. otherwise it would be a useless security feature.
what you do is take apart ur ingeny and then re do it youll do great u lil cutie
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out. Remove the wiring harness and the antenna cable.
Remove the retaining cover from your stereo. Remove the stereo retaining bolts. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out and remove the wiring harness and the antenna cable.
i currently have the same prob...to my understanging the stock stereo runs along with the dash lighting, so did you remove the stock stereo? also check fuses on the driver kick panel