Should be the "peel off" type Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub assembly
when you remove the caliper on the disk brake by removing the bolts on the inside of the caliper the rotor just slides off, the only thing holding the rotor in place is the wheel.
They could if worn or warped to the safe and legal limit.
Remove wheels then push back the pistons then remove calipers and brackets then the rotors.
No, there are no reset buttons on a 2007 Chrysler Sebring.
On the bracket the brake pedal mounts to.
Common brake problems on a 97 Chrysler Sebring can be caused by leaks, worn pads, and stuck calipers. Check your brake system as problems can cause a serious accident.
On a bracket, above the brake pedal.
Step one is to remove the tire. Step two is to remove the brake caliper. Step three is to remove the cap that covers the spindle the rotor is spinning on. Step four is removing the bolt holding the rotor on the spindle. Step five is pulling the rotor off the spindle.
underneath the brake pedal
Dot3Dot3
It uses DOT3.
DOT3 is recommended