answersLogoWhite

0


Best Answer

You must remove the angled brace tube over the battery. It unbolts easily and then the battery pops out. First you have to romove the black bar. I forget what its called, sorry. There is to bolts and each end. Tyhen you remove the two battery termails. Then you have to remove the hold down bolt. It is at the back of the battery at the bottom. It is a 13mm bolt.

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the battery from a 1999 Pontiac Montana?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the Battery size for Pontiac Montana 1999?

For a Pontiac Montana the battery is a group 78. Follow this link for dimensions.http://www.rtpnet.org/teaa/bcigroup.html


How do I replace the starter in 1999 Montana?

Begin by removing the positive cable from your battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new Pontiac Montana battery.


When was Pontiac Montana created?

Pontiac Montana was created in 1999.


1999 Pontiac Montana won't start with new battery?

you will need to call a pontiac dealer and get an activation code, because of the anti-theift system.


Can you remove the thermostat from the engine of Pontiac Montana 1999 Model without having problem with the engine?

no,not really


Where is the camshaft sensor located on a 1999 pontiac Montana?

Cam sensor location 02 pontiac montana 3.4


How do you replace the radiator on a 1999 Pontiac Montana?

Drain the water from the radiator. Remove the water hoses. Remove the retaining bolts. Reverse the process to install the new radiator.


What is the location of the water pump in a 1999 Pontiac Montana?

alternator


What size tires are on a 1999 Pontiac Montana?

215/70R15


How do you replace the tcc solenoid in a 1999 Pontiac Montana?

with explosives


What is the bank 1 sensor on a 1999 Pontiac Montana?

p134


How do you make the radio of 1999 Pontiac Montana work after it is disabled by the battery?

you will have to pull your radio out of the dash to be able to look at the model number and/or serial number of your radio. Call a local Pontiac dealer and they can give you a code to enter when you turn your radio on after changing your battery.