Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install * To replace the belt rotate the tensioner pulley clockwise to release belt tension * Remove the belt from the auxiliary components and slowly release the tensioner * Route the new belt over the various pulleys again rotating the tensioner to allow the belt to be installed then release the belt tensioner
replace the starter on a 1998 Chevrolet cavalier
No, I have a 1998 Cavalier and it does not have a cabin filter. You can take off the 3 bolts off the heater blower and remove any leaves or debris.
The easiest way to reset your 1998 Chevrolet Cavalier theft system is to remove the fuse. Keep the fuse out for 10 seconds and replace it to its original slot.
I am looking for the Thermal fusible link for the headlights on a 1998 Chevrolet Cavalier
Begin by removing the traveling arm retaining bolt from your 1998 Chevrolet Cavalier wiper motor. Remove the wiper motor retaining bolts. Remove the wiper motor wiring harness. Reverse the process to install your new wiper motor.
Never as the 1998 Chevrolet Cavalier does not have a belt, it has a chain that should last the life of the engine.
This diagram is under the hood. Look for it
Remove the positive cable from your 1998 Chevy Cavalier battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
You probably have a bad serpentine belt and tensioner.
remove the bolt on the pully or use a pully remover depending on the style of pully and put new one on.
I owned a 98 and it was limited to 115 mph.
what other hard tops from convertables will fit a 99 Chevy cavalier