i truly believe there is a wire clip right behind the handle just pull handle alittle bit and look downward and u should see it,take it off with reg.screwdriver and the handle pulls right off after the clip is off
you have to take the screws out of the long handle then on the arn rest you have plastic screw things that pop in the door all you have to do now is pull the bottem out then work your way up the door panle when you get to the window simply lift up michael
how do you remove a car handle window for a 1995 lincoln car?
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
remove plastic moulding around door handle and door lock. unscrew door handle and unsnap plastic anchors around lower portion of door unscrew door panel from door. lift up on panel and remove. remove plastic. unscrew motor from door , let window down and remove two screws holding window. remove motor and metal bar replace and reverse process. 1991 Nissan maxima
break the window and drive away real fast
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
remove the door handle and window crank (you can use a coat hanger to remove the clip) remove the door lock knob. Then reach down at the bottom and pull out the panel. Install in the same order.
HIT IT WITH A MALLEt
Yes.
You will need to remove the inside door panel. Remove the door handle retaining screws. Remove the linkage from the back of the door handle.
Assuming its not a power window...and you wnat to remove the cranking handle... Possibility: look behind the handle for a U-shaped spring clip that fits into slots on the handle "sleeve". This clip will have two small tangs that can be levered to push it back out of the slots in the handle.
there is a small clip between the handle and door panel that u have to remove it is easy if u have a small pick to hook it with then to install just place clip on handle and push on the window regulator shaft.