Serpentine puller
You need a 1/2" ratchet or a Johnson bar. The idler pulley has a square 1/2" hole that the square on the ratchet will fit in and allow you to turn the pulley and relieve the tension.
Aproox 1/4 in side to side movement.
if it is a serpentine belt, there is a tension pully that keeps it tight if is a v blet , u generally adjust the tension by moving the alternator
on the tensioner there is a square hole for a ratchet or use a wrench on the nut The 2001 actually doesn't have the sqare hole. That's on the earlier trucks. Use a 15mm socket on a long breaker bar. There is a bolt head at the center of the tensioner pulley (just to the left of the middle of the engine if you're looking at it). Turn the handle toward the passenger side, and this will release the tension on the belt. Make sure you have a diagram to tell you how the belt is routed, so that you can put it back on in the right manner. Oh, and the F150's come with a 4.2L V6, not a 4.3L. Just FYI. Good luck!
No. The hardness of serpentine is 3-4.5, whereas a hardness of at least 7 is needed to scratch glass.
I guess i dont know the answer.. Though i could do it in my sleep. Do you want the pulley pattern? if so, more info is needed. If you want to know how to get the tension loose. Turn the tensioner on the power steering.
I actually have a 1998 Oldsmobile Intrigue with the 3.8 and just recently changed the serpentine belt all u need is a wrench to twist the tensioner pulley to release tension to slide the belt on to the pulleys other than that no equipment is needed if u have following questions send me an email to mr.blique@yahoo.com i hope this is the answer u were looking for
No, there is no special driver needed
He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.He was a difficult individual so he needed special attention.
If the a/c belt is not part of the Serpentine system it is not needed but if it is then your serpentine belt is the a/c belt the a/c probably just needs a freon recharge and will get it working again
because people needed a way to relieve pain.
Oil for 1997 infiniti needed