0
1. Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box). Note: If you press an invalid key during the Manual Code Search, the remote does not respond and the LED indicator light does not blink. If you do not press a valid Manual Code Search key (TV, VCR, DVD, SAT·CBL, ON·OFF, GO BACK), the search times out after two minutes. When the search times out, the LED indicator light blinks four times and turns off. The last programmed code under that component key is retained. 2. Press and hold the component key (TV, VCR, DVD, SAT·CBL) you wish to program. The LED indicator light turns on and remains on. 3. While holding the component key down, press and hold the ON·OFF key. The LED indicator light turns off. 4. After holding down both keys for three seconds, the LED indicator light turns back on. 5. Release both keys. The LED indicator light remains on. Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control. 6. Press and release the ON·OFF key repeatedly until your component turns off. Each time you press the ON·OFF key, the LED indicator light blinks, and the next code in the list is sent. This process continues until all of the codes in the Code Lists have been searched. If your component turns off, you have found the correct code. (If it cycles through and the LED indicator light blinks four times and turns off, all codes have been searched. The Manual Code Search method is exited.) Press Stop when TV turns off.
Wiki User
∙ 16y ago
Wiki User
∙ 11y agoFollow the steps below to program the remote! There are also the top 5 most used codes for an RCA TV listed below.
Codes: 503, 627, 666, 633, 725
Press and hold the clear TV button until all the mode lights light up. Release the button and the TV light will be blinking. Enter the code and press #. The TV button should flash 3 times. Try functions (Volume, Power, etc..) and see if it is working. If there is no function, repeat steps 1-4 with another code.
Add your answer:
Earn +20 pts
A code for a dish network remote to work your olevia tv?
The codes we here at DISH Network have & would use to attempt to program the DISH Network remote with your Olevia TV would be, 506 or 127.
TV codes for smyphonic TV with dish network?
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
Symphonic tv code for dish network 322 controller?
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
What is the gyration remote control code for dish network dvr?
You can program your DISH remote to work on other electronic equipment. The gyration remote should have instructions on how to program it to other components. If you don't have the instructions, I would give the company a call to try and get the instructions.
What is the dish network remote code for a brookstone remote control?
You can program your DISH remote to work on your TV and other electronic components but unless you have codes or instructions on how to a universal remote to the receiver, we don't have codes specifically to operate in that manner. I would contact the manufacturer of your remote.
What is the dish network remote control code for apex digital tv?
Try these remote codes: 743, 744, 745, 757. If these do not work, call Dish Network they will be happy to assist you.
Will your dish vip622 remote control your Bose v20 lifestyle surround sound three bose codes do NOT work.?
No, the dish network remote only has those codes. If you want to control everything, get a Logitech Harmony remote.
i am going to buy a new tv lg 37lh20 and want to know if my dish network remote control will work with it.?
Call the Dish Network to inquire about your remote and your new TV: 1 866 869-3109 Customer service can advise you and provide a new remote control if needed.
Is there any way to program a Samsung television remote control to operate the dish network?
Some universal remotes can be programmed to work on the DISH receiver but you won't be able to use your Samsung TV remote to operate your DISH receiver. You can program your DISH remote to work your Samsung TV. I have provided instructions on how to program your DISH remote to your TV. I have also provide TV codes.TV codes: 738, 680, 516, 679, 666, 573, 665, 667, 669, and 653Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.Possibly, depends on the remote
What is the IR remote code for an Auria TV that will work for Dish Network?
Auria TVs use the same codes as NEC. If you lookup NEC in your remote control manual it should work. 10037 will work.
Will a gyration air remote control work on a dish network dvr 722?
Normally only our remotes will work with our receivers. Some universal remotes may be used but may not have all the functionality of our remotes. You would need to get the code for our receiver from the manufacturer or instructions on how to manually program the remote to our receiver.
How can you change old dish network remote to new remote?
To address the remote to the receiver, you do need to be on the System Info screen. You can accomplish this by pressing the Menu button on the old remote 2 times or by pressing the System Info button on the receiver for certain receiver models. Once you are on the System Info screen just follow the instructions below. On a Dish Network Remote Press and hold the sat button down on the new remote until all the buttons light. release the sat button it should be blinking. press the rec button 3 times. your new remote should now work your Dish Network Receiver.
