To program a Symphonic TV with an RCA RCR-612 universal remote, there are four codes which you can try. Those codes are 1033, 1038, 1046, and 1047. To try the codes, press and hold the TV button on the universal remote. After you enter the fourth digit, the power light will turn on. Once the light is on, release the TV key. If the power light turns off, you have the correct code and can now use the remote. If the light blinks, it isn't the right code and you need to repeat the procedure until you find the right code for your particular TV.
how to program my tv with the RCA D 770 - universal remote control which has no code search button
that's what the INSTUCTIONS are for
It would depend on the brand of remote that is being used. Just look at the instructions that come with the remote to find out how to properly set it up.
From the company that built your universal remote. Check their website.
What is universal remote control code for air-con?
i have a remote with no name..how do i program my symphonic tv
The zenith universal remote codes to program a symphonic television are 0091, 0053, 0155, and 0126. A universal remote can be used to operate a number of brands of one or more electronic devices.
What is the symphonic tv code for universal remit
trying on 5220 Thank
for Philips the code is 0324
not possible sorry buddy
Try the link and see if your units owner's manual is listed. Link to it and read the instructions to get the scoop. Note: If you do not have the original remote and are attempting to program a universal replacement to work on your Symphonic set, you may be unsuccessful. Symphonic has a number of sets with "oddball" remote codes that are not included in universal replacements. There are 800 numbers to the companies that make the universals, and they can tell you if their unit will work on a given make and model number. You may also be able to find this out online at the remote control manufacturer's site. Good luck.
how to program
The Symphonic televisions usually all have one code to transmit the signal to the Philips Universal Remotes. The normal code that works for most of them is 4827-1593.
You may not be able to.There are a few "hard-headed" manufacturers who make sets and equipment that have remotes with "oddball codes" and they cannot be replaced with the universal remotes. Some Symphonic units are like this. Comcast tech support may be able to help. Call them. They work for you. But brace yourself to accept that their unit - and none of the universal aftermarket remotes - will be able to be programmable to operate the equipment.YES THERE IS A CODE FOR A SYMPHONIC COMBO TV TO PROGRAM A COMCAST REMOTE #20000 WORKS MINE JUST FINE.
To program your universal remote, you will need to know the brand of remote that you own. Once you have figured that out, go to the website of the manufacturer, and they will have instructions listed on how to program your remote.
how to program my tv with the RCA D 770 - universal remote control which has no code search button