answersLogoWhite

0


Best Answer

I hope you meant a keyLESS remote. Here ya go:

Important! Once the BCM enters program mode, all transmitters must be programmed at the same time. Any transmitters not learned at this time will be erased.

1) Remove the key from the ignition cylinder

2) Remove the BCM PRGRM fuse from the fuse panel

3) Close all the doors

4) Close the liftgate

5) Turn the ign lock cylinder

to the ACC. position

6) Turn the ignition lock cylinder

to OFF, and then back to ACC within 1 second

7) Open and close any door

A chime will be heard when the system enters the BCM programming mode

IMPORTANT!

After 7 seconds a chime may be heard confirming successful synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.

8) Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for 14 seconds

9) Repeat the previous step on each additional transmitter to be programmed.

10) Remove the ignition key from the ignition cylinder

11) Install the BCM PRGRM fuse back into the fuse panel.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you program a key remote for a Pontiac Montana?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How to program remote key less entry remote 1997 Pontiac transport?

the dealer normally does this service for no charge


Program key remote 2007 mustang?

Program key remote 2007 mustang?


How do you program a 2009 Mini remote key?

how to program remote for mini cooper


How do you program a 2009 Mini Cooper remote key?

how to program remote for mini cooper


Glove box 99 Pontiac Montana can't open with key?

When you cannot open the glove box of your 1999 Pontiac Montana with the key you may have a broken key lock. You can change these locks out with aftermarket key locks which are available.


How do you program the remote key fob on a 2005 Chevy Malibu maxx with remote start?

How do you program the remote key fob on a 2005 Chevy Malibu maxx


How do you program a Mazda Millenia key less remote?

How do I re-program a remote for a 1997 mazda millinea?


How do you program a 2007 Kia Optima key-less remote?

You have to take your remote to the dealer. Kia will not let you program the remote by yourself.


How do you program a key less entry remote for Toyota Camry 2011?

You have to have the dealership program a key less entry remote for 2011 Toyota Camry.


How do you program your new key in a Pontiac Montana 2000 when you lose the original?

if your key had a chip in it, write down your vin#????????, and take your title insurance card, the dealer should be able to cut you a knew set of keys.


Where can you get a replacement key for a 2000 Pontiac Montana?

dealership it needs to be coded for that vehicle


How do you find the key code for a 1999 Pontiac firebird?

You have to put the car into program mode, usually you can order an new keyless entry and it has the instructions. If you are talking about the ignition key security, you will have to buy a remote start for the car as this will bypass the resistor in the key.