answersLogoWhite

0


Best Answer

Turn the device on you want to program - the TV for instance. Point the remote directly at the TV. Hold down the TV button and the power button illuminates while also holding down the TV button at the same time. When the power button turns off, then release both keys. Now, point the remote directly at the front panel of the device, hold down the play button for 5 seconds. Did your device turn off? If yes press the stop key and you're done. If no, keep pressing play every 5 seconds until your device turns off. When your device turns off, press the reverse key on the remote and wait at least 2 seconds. The remote tries the last of the previous ten codes. Hopefully this answer solves your problem.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

16y ago

While following these instructions, keep the following in mind: * device = the component you wish to control with your remote (TV, DVD, VCR, etc.) * DEVICE = the button labeled for the component you wish to program # Turn on the device you wish to program. # Turn off all other devices in the general vicinity. # Press and hold DEVICE # While holding DEVICE down, press ON/OFF and hold them both down until the LED turns on for that device. # Release both buttons. # Point the remote at the device, press and release PLAY and wait 5 seconds or until the LED stops flashing. # If the device does not turn off, then continue to press PLAY and wait the required interval (for a maximum of 20 times) until the device turns off. # When the device turns off, press REVERSE, wait 2 seconds and continue doing this until the device turns back on. # To finish programming, press and hold STOP until the LED turns off.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

You need to have a Code search button or at least have a list of codes. You can call the manufacturer for a list or a book. Look for a phone number and you will be able to get some help with this problem.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago
  1. Turn on the first device you want to program to the Gemstar remote control.
  2. Hold down the button you want to program, for example "DVD," while holding the "ON/OFF" button until the red indicator light comes on. The remote control is now in programming mode.
  3. Point the Gemstar remote control at the device and press the "Play" button. The indicator light will blink for approximately five seconds as it

    searches

    the first group of codes.

  4. Press the "Play" button after the indicator light stops blinking to check the first group of codes. Continue doing this until the device powers down.
  5. Push the "Reverse" button and wait approximately 2 seconds. Continue doing this until the device turns on again.
  6. Save

    the code setting by pressing and holding the "Stop" button until the indicator light stops blinking.

  7. Repeat Steps 1 to 6 for each device you want to program to the Gemstar remote control.
Direct Code Input
  1. Review the last page of the RCA Gemstar remote control user manual. This page has a list of device manufacturers. Look up your device's manufacturer to find the remote codes for your device.
  2. Turn on the device you want to program to the remote control.
  3. Press and hold the button you want to program, such as "SAT/CABLE," and use the keypad on the remote control to enter the first code from the list.
  4. Release the button you want to program and press the "ON/OFF" button to see if the programmed code worked. The device should shut off if the code was successful.
  5. Repeat Steps 3 and 4 with the next code on the list until you find a code that operates the device.
  6. Program the rest of the devices you want controlled by the Gemstar universal remote control by repeating Steps 1 to 5.


This answer is:
User Avatar

User Avatar

Wiki User

16y ago

Found this link for the AT&T 200C Remote control: http://www.anvari.org/cols/Useful_Users_Manuals/200C_Remote_Control.html

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

what are some of the codes for decibel universal remote

This answer is:
User Avatar

User Avatar

Anonymous

Lvl 1
3y ago

D770

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you program a Guide plus universal remote without a code search button?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you program an RCA universal remote without a program code?

how to program my tv with the RCA D 770 - universal remote control which has no code search button


How do I program GPT universal remote control?

To program a GPT universal remote control, hold down the power button at the same time with the button for the device that is going to be programmed. When the other buttons on the remote blink, let up and press on the power button again. The device should turn on. If not, repeat the process.


How do you program a GE universal gemstar remote control for a mgnovox TV?

Hold the button you want to program and then hold the on/off button at the same time it should program


How do you program an RCA Universal remote without a code search button?

This unit is basically the same as the D770 universal remote. You can download instructions from RCA at RCA.COM. The Only difference is there is no light below the ON/OFF button, the individual buttons will light, and when you hold down the device key and the on/off together all lights will come on.


Your power button on your TV broke Is there any way to program a universal remote without the TV being on?

Try running the universal remote programming codes until one works. There should be a sheet of codes that came with the remote. If that doesn't work than chances are that you may have other problems with the TV.


How do you program a GE universal remote to a GE converter box?

You can program your GE universal remote, to your converter box, by holding the power button in until the auxiliary read lights aluminate red. Select auxiliary and input the proper code.


How can you program a brightstar universal remote?

how to program


How do you program your iHip universal tv remote?

there is no cable button on this remote what do i push to hook cable its says hit cable button


Need universal remote codes?

To program your universal remote, you will need to know the brand of remote that you own. Once you have figured that out, go to the website of the manufacturer, and they will have instructions listed on how to program your remote.


How do you manually program a Philips Universal cl015 remote without the code?

Your remote's model is actually PMDVD6. You should be able to get the manual for this remote from Philips' website.


What are the program codes for a quasar tv on a rca rcr3273 universal remote?

i have a rca remote without any light, have a quasar tv, how do i make this work?


How do you program a universal game changer remote without code book?

Without a code book, you can program a universal game changer remote by using the "scan" function. Typically, this involves holding down a specific button while pointing the remote at the device you want to program. The remote will cycle through different codes until it finds the correct one for your device. Consult the remote's manual for instructions on how to activate the scan function.