0
How do you prep an automobile with existing paint to be repainted?
Wiki User
∙ 17y ago
If you are repainting an automible and the paint is ok *Sand the auto with 320 DA sand paper (this is an air tool) *Scuff all shiny spots with scotch brite *Spray sealer down *Put basecote clearcote down for your final finish
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How do you paint car?
Prep body, primer, paint, finish, let dry
How do you paint hot wheels?
Do paint a Hot Wheels correctly, you would have to take it apart, prep it and then paint it.
How do you paint over water based sealant?
You just paint right over it, no special prep is necessary.
What is the easiest way to prep plaster for paint?
Get a really good primer.
How much to paint a Rear door of a ford expedtion 2001?
A few hundred dollards. For prep work, paint, sealers, exc.
How do you prep semi gloss paint for repainting?
lightly sand to break the gloss and give the surface a better surface for paint adhesion
What would make a fresh coat of paint loosen the old paint?
Chances are the old paint was already loose and it stuck to the paint brush or roller. Surface prep, no matter what method is used is hard, but necessary work.
Is elastomeric paint suitable for wood siding on a residential home application?
Yes. the key is in the prep work.
Can you paint over semi-gloss with flat paint?
yes you can, prep it first light rub down and apply two coats of the flat paint.
I would like to paint my Yamaha Banshee's plastics flat black what paint should I use that is flexible like the plastics and will not crack ...and what steps should I take to prep them for paint?
dont use can spray paint it wont hold up to gasoline. paint does not have any paint hardener in it
What is the price one should charge to prep and paint home exteriors?
Exterior paint cost can be figured by looking on the back of the can. Look to see how much square footage the can will cover, then divide that into the quoted paint cost.
How do you prep wood for elastomeric paint?
Use a good quality primer that is intended for all paints or for oil based paints. You might want to use a tintable primer (Killz for example), and have it tinted to approximate your final paint color. That gives much better chances of painting in one coat.
