You measure current by inserting an amp meter in series with the circuit or using a clamp-on meter to measure current by induction. You measure voltage with a volt meter across the supply. You measure resistance in ohms across the resistance. Luckily all these functions are in the same meter in most cases.
Compute the open load voltage of the current source across its shunt resistance.This voltage becomes the voltage source's voltage.Move the current source's shunt resistance to the voltage source's series resistance.Insert the new voltage source into the original circuit in place of the current source.
current
Voltage is a measure of the E.M.F (electromotive force) which drives current around a circuit.
since it stands for voltage ohm meter :) can measure voltage current and resistance
A standard oscilloscope is designed to measure voltage, you need a current probe for your oscilloscope to measure current.
1. Voltmeter has high impedance and hence will restrict the current severely.a) Electric Bulb will not glowb) The Ammeter will just measure the current that Voltmeter allows and since this current is much smaller than actual current nothing will happen to ammeter.c) The Voltmeter will measure the Voltage that is being applied.d) This will allow you to measure the resistance of the Voltmeter.VR=V/I
A multimeter has the ability to measure both AC and DC current along with voltage and resistance.
Voltage divided by the resistance of what ever you want to measure the current in.
One way to determine current is to measure it, with an ammeter. Another way is to calculate it using Ohm's law: current = voltage / resistance.
Measure the voltage V and current I and compute the unknown Resistance R=V/I.
You have to measure the voltage, and the current. The resistance is then calculated by using Ohm's Law.