You would have to remove the red lenses and replace them with amber ones. Then you would get a ticket for improper lights.
To make the hazard lights alternating flash, a kit called a wig wag is added to the flasher system. To have actual strobe lights, then a strobe kit with its own light has to be installed.
the alarm
LEDs are used in traffic lights, on computer lights, car lights and indicators. You can also purchase LED flashlights and torches. Can be used in small devices for a variety of uses.
Amber LEDs are good for when a person is camping because they don't attract as many insects. They can also make it easier to see in the dark as the eyes don't need as much time to adjust from light to dark with amber lights.
The spare bulb with the red tip make the lights flash on and off
Wire in a turn signal flasher in series with the circuit you wish to flash. The flasher has two terminals. Just insert the flasher anywhere in the circuit. It will make/break the circuit to make the lights flash. This is considering that the circuit is 12 volts and not 120 volts.
Make a plastic mould around it that covers the whole flashlight and no holes. This only applies to the flash lights that have a button to be pressed...
flash your head lights or take the fuse out and make sure it ain't blown
Connect the light wires to the terminals on your amp that send the signal to your subwoofer.
Dark amber.
The natural indicators are blackberry and many other bright-coloured flowers make good natural indicators
Generally, you press the remote button once and the alarm arms and the lights flash once. If you press it a second time, the lights flash again and the alarm chirps.