You have to apply heat greater than 550 degrees Fahrenheit. Once the assembly is heated the bolt will be loose enough to be unthreaded.
You will have to remove the screws, with an impact. They do remove, but be careful not to break the glass. The only thing keeping the nut from turning is the glass. The screws have threadlocker on them.
how to loosen a tight nut
Loosen' Control was created in 2000.
Loosen My Strings was created in 1996.
If it is a plug loosen counterclockwise If it is a petcock loosen clockwise
loosen the bolt in the center of the drive belt pulley, then loosen the bolt on the side of the pulley. as you loosen the side bolt the tension lets up
how do I loosen and adjust altinator
What side do I turn the tensioner to loosen it?
Loosen the pulley first and then the belt should loosen off the tracks., follow the diagram on the hood
No, you do not have to loosen the girth before mounting a horse.
loosen retaining bolts
Loosen Up My Strings was created in 1997.