Most likely use a socket and longer extension bar then loosen by pulling clockwise
Mounted with "left-hand" thread
The 2004 Dodge Durango has rear wheel drive.
You can remove the old serpentine belt on your 2004 Dodge Ram by loosening the tensioner pulley. Put the new serpentine belt on and tighten it with the tensioner pulley.
The 2004 Dodge Grand-Caravan has front wheel drive.
there should be a square hole in the tensioner arm that you use a breaker bar and an extension in the hole and just turn the tensioner whatever direction that will loosen the belt.
, i also have 97 mountianeer, when i changed my alternator i couldn't figure out where the tensioner was. but i looked at the belt routing diagram located under the hood by the headlights and the tensioner is on bottom of the motor on the passenger side so you have to get it from the bottom, i hope that helps you. If it is the same tensioner style as the 2004, you can get it from the top using a 3/8" drive breaker bar inserted in the square hole by the pulley on the tensioner. I just replaced mine 2 days ago.
Counterclockwise to loosen
Tensioner PULLY is behind the timing BELT cover
YesYes
Yes
where is the tensioner for the serpentine belt on a 2004 ford ranger
1. loosen lug nuts a few turns and use a jack between suspension components and tire/wheel. 2. Or loosen lug nuts a few turns and take it for a drive. Listen for the wheel to come loose, tighten lugs and drive home, it should now come off.