The cam sprockets have marks, triangles on them near one of the teeth. These are lined up with notches in the rear cover for the timing belt. Some crank sprockets have two marks, one to align with the mark on the block, the other to use to match to marks on an OEM timing belt. After market belts don't usually have this mark.
i need timing marks of merc c180 kompresser diagramatically if possible.thank you
Look for detent marking on camshaft sprockets and align them with timing marks on cylinder head, should be visable markings and ensure that engine is at TDC on compression stroke, and timing marks should all line up
The timing marks on a Dodge 2.2 is next to the oil. This is under the hood.
where r timing marks on a 5.9 2000 dodge durango v8.
what are timing marks for a 96 3.0 dodge caravan please?
You have to put proper gap for lifters and use marks to make sure that timing and the positions of camshafts are correct.
The timing marks on a '97 Dodge Stratus are located on the timing chain and the camshaft sprocket. They must be aligned to set the initial timing.
location timing marks 1993 dodge datona
timing marks dodge 2.2 engine how to set them
how to set the timing marks on a single cam dodge neon
They are on both camshafts behind the camshaft cover and on the crank.
each car model will have its own way of resetting the timing but all should have some form of timing marks on pulleys/ camshafts. Refer to a workshop manual for the make /model/year of your vehicle - they are usually quite good for things like this.