answersLogoWhite

0


Best Answer

Do you mean solid hardwood? You should not install 3/4" solid hardwood directly on top of terrazzo, or concrete or tile. Solid hardwood is supposed to be nailed into 3/4" plywood.

Now theoretically, you might be able to add 3/4" plywood in, if you can actually get it into the terrazzo. It is possible (but challenging) to add plywood into concrete using hilties, but it tends to be expensive and time consuming. Also, if you were to add plywood and solid hardwood, you would be raising your floor 1.5 inches. This may cause some height issues, especially for the doors (which might need to be shaved or replaced). If there is kitchen, this could cause height issues with appliances and/or cabinets.

However, if you mean an engineered hardwood, it could be floated on top of the terrazzo. You put an underlayment underneath and then install the wood on top. If it is a clickable engineered wood, then you just click it in; if it isn't, then you would glue the joints together.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you lay 18mm Brazilian hardwood floor over a terrazzo floor?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is 18mm?

18mm is 0.70866 inches.


Does 18mm equal 180cm?

18mm is 1.8cm


How many meters long is 18mm?

18mm = 0.018m


Which is bigger 7cm or 18mm?

7cm is much more than 18mm. Through conversions, 7cm is the same as 70mm, and 18mm is 1.8cm.


If the radius of a circle is 18mm what is the diameter?

If the radius of a circle is 18mm, its diameter is: 36mm


18mm 7cm 3dm 1m least to greatest?

That's in the right order.


How big in inches is 25mm by 18mm?

25 mm * 18mm = 0.98 inches * 0.71 inches.


How do you remove the seats from an E-150 Chateau?

Take the four nuts off the studs under the seat on the floor of the van. Either a 15mm or 18mm socket and ratchet will do the job.


What is the radius of 18mm?

9mm


What size threads Is the o2 sensor 18mm for 5.9 dodge ram?

18mm. Just had to replace the 02 sensors on mine. Had to buy a box of 12 nuts! And a 18mm bolt to plug the old location.


How to replace passenger side motor mount on Ford Focus?

I just changed my yesterday on my 2003 Ford Focus LX. I got a 2x4 piece of wood and a regular floor jack. What you do is stick the 2x4 on the floor jack and slide it under the car and slowly lift the engine up. Remove the 10mm bolt holding the coolant tank on, then pry the plastic tab on the strut side of the tank off the metal bracket. You will need a 15mm and a 18mm deep socket and an extension. I unbolted the two 18mm then three 15mm bolts. You'll need a breaker bar and 18mm deep socket to get the nut off the bottom of the motor mount.


What is the volume of a cube whose side measures 18mm?

The volume of a cube whose side measures 18mm is: 5,832 mm3