A small flywheel has 153 ring gear teeth, a large flywheel has 168 teeth on the ring gear, small one measures 12 3/4" across and large measures 14" across.
The small ones have 153 teeth, the large ones are 168.
If you are asking if a small block chevy V8 flywheel (most common engine in a 1967 Camaro) will work on a Pontiac V8 (most common engine in a lemans), the answer is no.
yes it can be used on any inturnaly balanced Chevy engine
Usually it is a flywheel with a clutch to spin up the engine. In some installations they use a small low power electric motor to keep it spinning This allows the backup generator to start producing power in less than a second On some large engine piston/propeller aircraft a small starter engine spins the flywheel and engages to spin the engine once the flywheel is up to speed.
a small block 350 chevy
Yes, the only small block Chevy flywheel that doesn't interchange is the small block 400 ci.
This can be caused by a worn flywheel, or a bad starter drive. You'll need to remove the starter and look at the flywheel to see which is bad.
Yes, except for the 400 which has an externally balanced flywheel, and dampner.
A small flywheel needs to stay with the starter that goes to it. You can use either flywheel, and the block should be drilled for either starter.
The small block chevy turns in a clockwise rotation.
300 cyl engine not a small block at all
No.