answersLogoWhite

0


Best Answer

If you have a bad rotor, when you turn a corner sharply it will make a humming noise kind of a wah wah wah (if you will). If you have it apart, the bearing would probably look visibly worn, rusty, dry, ground down etc. Hope this helped.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you know if the bearing is bad or the rotors are loose?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Should your rotors be loose?

Bad wheel hub bearing? If you are referring to the slip-on type of rotor, then yes, some of them feel loose on the hub and this is normal.


Are rotors supposed to wiggle or move?

No just rotate smoothly Could be bad or mis-adjusted wheel bearing Loose caliper or wheel


How do you check the bearing on alternator?

If it is noisy, loose, or hard to turn, it is bad.


What would cause the front rotors to move?

Bad bearings inside or loose castle nut.


Why would rotors go bad twice in one year?

How are your calipers an wheel bearings looking. i had a bad wheel bearing and actually blew and warped my rotor.


Why when you turn your car on does it start screaming?

Probably either a loose belt or a bad bearing.


Why car shakes at 35 mph or 40 mph?

perhaps it is bad hub bearing Tire out of balance, loose lug nuts, worn or loose wheel bearing, defect in a tire, etc.


How do you tell if wheel bearings are bad?

Most of the time you can hear a bad wheel bearing but the only 100% sure way to know is to remove the bearing and inspect it.Most of the time you can hear a bad wheel bearing but the only 100% sure way to know is to remove the bearing and inspect it.


What could cause a screaching noise from a wheel?

check your brake linings they have little metal tabs that will rub the rotors when they are bad. could be a wheel bearing


Can burnt power steering fluid cause a whining sound?

Usually a bad bearing or loose belt.


Ac sreeching when driving?

Possibly loose belt or bad bearing(s). Check tension first.


How do you know if your rotors are bad?

If you have a pulsation on stopping the rotors are warped. They will need to be checked with a micrometer to determine if they can be resurfaced of discarded. The government set the regulations.